Modern Collision​

Windshield Camera Calibration in Phenix City, AL

Windshield camera calibration in Phenix City, AL realigns the forward-facing camera behind the rearview mirror after a new windshield is installed, so lane departure warning and automatic emergency braking read the road correctly. Modern Collision replaces the glass and calibrates the camera in one visit at 3940 US Highway 80W. Call (334) 732-0988 for a free same-day windshield and camera estimate.

Why Choose Modern Collision for Windshield Camera Calibration

Glass and Camera Together

Replacement and calibration completed in one shop visit.

Static and Dynamic In-House

Both calibration types performed at the Phenix City shop.

Written Scan Report

Pre-scan and post-scan results sent to the owner and the insurer.

I-CAR Gold Class Shop

Plus 10 OEM certifications, including Tesla and Rivian programs.

Lifetime Warranty

Covers parts and labor on glass and calibration, with no time limit.

4.9 Stars on Google

Based on 402 public reviews of the Phenix City collision shop.

What Windshield Camera Calibration Includes

Step / Component What’s Included Typical Time
Pre-Scan Forward camera and ADAS module scan; fault codes documented before any glass work About 30 min
Windshield Replacement OEM-fit, safety-rated glass installed and urethane seal set; at least 1 hour of seal cure before drive-away 60 to 90 min
Target Setup (Static) Manufacturer-specified target board placed at a measured distance; vehicle positioned per OEM spec Included in static calibration time
Static Calibration Forward-facing camera calibrated on a level floor under controlled lighting 30 to 90 min
Dynamic Calibration (if required) Road drive after the urethane cure, at the OEM-specified speed, while the camera relearns lane markings 30 to 60 min
Post-Scan and Report Final DTC scan of the forward camera module; written report showing the camera’s before-and-after status About 30 min

Windshield camera calibration is the step that follows windshield and glass replacement on any vehicle with a camera mounted to the glass. Modern Collision installs OEM-fit, safety-rated glass, lets the urethane seal cure, and then calibrates the camera in the same shop, so the vehicle never travels to a second facility between steps.

The service centers on one sensor: the forward-facing camera of the vehicle’s Advanced Driver Assistance Systems (ADAS), the driver-support features that warn of hazards and can brake or steer to help avoid a collision. Vehicles that also need radar, blind-spot, or surround-view work after a collision receive full ADAS calibration of those systems.

Why a New Windshield Needs Calibration

A new windshield needs camera calibration because the forward camera’s mounting bracket is bonded to the glass, so replacing the glass changes where the camera sits and where it points. Small differences in bracket position, glass curvature, and installation angle are enough to move the camera’s view of the lane ahead.

Those differences matter because the camera measures distance and lane position by angle. Simple geometry shows the scale: a 1-degree aim error places the camera’s reference point about 1.7 feet off target at 100 feet ahead. Calibration resets the camera’s reference so lane lines, vehicles, and road edges register where they actually are.

Vehicle manufacturers specify calibration in their repair procedures after windshield replacement on camera-equipped vehicles. Modern Collision follows that procedure for each make and model and records the result in the post-scan report.

Static vs. Dynamic

Static and dynamic calibration reach the same goal by different routes, and the vehicle’s OEM procedure decides which one a windshield camera needs.

Static calibration happens inside the shop. A manufacturer-specified target board stands at a measured distance in front of the vehicle, on a level floor under controlled lighting, and the camera calibrates against that fixed pattern. Static calibration can begin once the new glass is installed, and the vehicle is positioned to OEM spec.

Dynamic calibration happens on the road. A technician drives the vehicle at the OEM-specified speed with a scan tool connected while the camera relearns lane markings and road edges. Dynamic calibration starts only after the urethane seal has cured to drive-away strength, and roads with clear, visible lane markings help the drive cycle finish on schedule.

Some vehicles call for static calibration, some for dynamic, and some for both. Modern Collision performs each type in-house and confirms the required method in the written estimate.

How Long Windshield Camera Calibration Takes

Windshield replacement with camera calibration at Modern Collision typically fits within a single business day, with each stage timed as follows:

  • Pre-scan: about 30 minutes
  • Glass replacement: 60 to 90 minutes, followed by at least 1 hour of urethane cure before any road drive
  • Static calibration: 30 to 90 minutes
  • Dynamic calibration, when required: 30 to 60 minutes on the road
  • Post-scan and report: about 30 minutes

The calibration portion alone, from pre-scan to post-scan, typically takes 2 to 3 hours. Vehicles that need both static and dynamic calibration sit at the longer end of each range, and the written estimate states the expected pickup time before work begins.

How Windshield Camera Calibration Works

Windshield camera calibration at Modern Collision runs in four steps.

Step 1. Scan Before Glass Work

A pre-scan of the forward camera and ADAS modules records any existing fault codes before the old windshield comes out.

Step 2. Install and Cure

The new OEM-fit glass is installed, the camera is remounted to its bracket, and the urethane seal cures for at least 1 hour.

Step 3. Calibrate the Camera

Technicians run static calibration against the target board, dynamic calibration on the road, or both, as the OEM procedure requires.

Step 4. Verify and Report

A final DTC scan confirms the camera reports no active faults, and the written calibration report goes to the owner and the insurer.

Insurance for Windshield Camera Calibration

Windshield camera calibration is usually handled under the comprehensive or glass coverage that pays for the replacement windshield, with the calibration billed as part of the same glass claim. Some policies include full glass coverage with a reduced or waived deductible, while others apply the standard comprehensive deductible, so the policy terms set the owner’s share.

Many carriers route glass claims through a glass claims call center that may suggest a network shop. Owners can still ask for the replacement and calibration to be done at the shop they prefer:

Alabama drivers

Under Ala. Admin. Code r. 482-1-125-.08, an insurer cannot make a claimant travel an unreasonable distance to a specific repair shop, and an insurer that designates a shop is responsible for restoring the vehicle to substantially pre-loss condition.

Georgia drivers

O.C.G.A. § 33-34-6 bars an insurer from requiring a particular repair facility when the owner can get the same repair at the same cost elsewhere, and a Columbus driver’s glass claim stays under the Georgia policy when the work is done in Phenix City.

Modern Collision sends the estimate and scan reports to the adjuster and works with State Farm, GEICO, Progressive, Allstate, USAA, Farmers, Liberty Mutual, Nationwide, Travelers, and other carriers.

Have a glass claim number? Call (334) 732-0988, and the shop will send the windshield and calibration estimate straight to your carrier.

Windshield Camera Calibration Cost

Windshield camera calibration cost depends on the vehicle’s make and model, whether the OEM procedure requires static calibration, dynamic calibration, or both, and whether the calibration follows a new windshield in the same visit. 

As an industry reference point, CCC Intelligent Solutions reported in November 2025 that the average ADAS calibration fee had reached about $500 per repairable vehicle, while AAA’s 2023 research put the cost to transfer and calibrate a windshield-mounted camera to new glass at $360. Actual costs vary by vehicle and region.

On an insurance claim, the calibration is part of the glass claim and the owner pays only the share the policy assigns. On a self-pay job, Modern Collision states the calibration method and cost in the free written estimate before any work begins.

Lifetime Warranty on Glass and Calibration

Modern Collision’s lifetime warranty covers both the windshield installation and the camera calibration for parts and labor alike, and the coverage never expires. The warranty card comes with the delivery walk-around, and the shop checks in 30 days after pickup.

Glass and Camera Work for Phenix City and Columbus Drivers

Modern Collision replaces windshields and calibrates cameras at its single shop on US Highway 80W, serving drivers on both sides of the Chattahoochee River. Glass work and static calibration take place in-shop, and dynamic calibration drives start from the shop.

City / Area Drive Time from Shop
Phenix City, AL Shop location
Fort Mitchell, AL ~12 min
Columbus, GA (Uptown) ~12 min
Smiths Station, AL ~15 min
Valley, AL ~20 min
Opelika, AL ~25 min
Auburn, AL ~30 min

Drivers from Girard, Summerville, Lakewood, Russell County, Lee County, Muscogee County, Harris County, and Chattahoochee County also use the shop for glass and camera work.

What Drivers Say About Modern Collision

Modern Collision holds a 4.9-star rating across 402 Google reviews.

Google
Karoline Garcia profile picture
Karoline Garcia
April 25, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They did a great job on my Tesla! I highly recommend them. Although I’m hoping never to need a body repair again, if I ever did they would be my top choice.
Google
Darrell Henderson profile picture
Darrell Henderson
April 22, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Job done right the first time. Thank you.
Google
Freddie Paonessa profile picture
Freddie Paonessa
April 19, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Nice to have professional people who seem like friends good job
Google
Marilyn Jones profile picture
Marilyn Jones
April 19, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Title: Exceptional Service at Modern Collision I recently had the pleasure of using Modern Collision for repairs after an unfortunate accident, and I couldn't be happier with the service I received. From start to finish, the entire process was seamless and stress-free. Customer Service: The staff at Modern Collision were incredibly friendly and professional. They kept me informed throughout the entire repair process, answering any questions I had and ensuring I felt confident in their work. Quality of Work: The quality of the repairs exceeded my expectations. My vehicle looks as good as new, and you can't even tell there was ever any damage. The attention to detail and craftsmanship truly impressed me. Timeliness: Despite the extent of the repairs needed, Modern Collision completed the work in a timely manner, allowing me to get back on the road quickly. They even went above and beyond to accommodate my schedule. Communication: Communication was excellent from start to finish. I appreciated the regular updates on the progress of my vehicle, which helped alleviate any concerns I had about the repair timeline. Overall Experience: Overall, I highly recommend Modern Collision to anyone in need of collision repair services. The combination of exceptional customer service, high-quality workmanship, and efficiency truly sets them apart. I won't hesitate to return if I ever need repairs in the future. Thank you to the entire team at Modern Collision for your outstanding service!
Google
Juan Gil profile picture
Juan Gil
April 8, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They go above and beyond to help get your vehicle back on the road!
Google
leah cameron profile picture
leah cameron
March 25, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They did a great job of ensuring every detail was fixed properly and kept me updated the whole way through. Will refer them again and again.
Google
Wes Green profile picture
Wes Green
March 23, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
One of the best collision repair experiences I have ever had. From the intake of my vehicle to repair completion the experience was just amazing. I will definitely use them again if I have the need for future repairs.
Google
Victoria Taylor profile picture
Victoria Taylor
March 21, 2024
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
They were amazing! My car looked brand new! And the inside was vacuumed out! So grateful for their service.

On Carwise, Modern Collision has 1,282 reviews and a 99% recommendation rate.

Get a Free Windshield Camera Calibration Estimate

Windshield and camera estimates are free and same-day at the US Highway 80W shop, open weekdays from 8:00 AM to 5:00 PM. Call (334) 732-0988 and the estimate will confirm the glass, the calibration method, and the expected pickup time. For a cracked windshield, 3 photos of the damage are enough for a free first look, with nothing to commit to.

Get a Free Windshield Camera Calibration Estimate

Frequently Asked Questions About Windshield Camera Calibration

A vehicle is ready to drive once the urethane seal has cured for at least 1 hour and the post-scan confirms the camera reports no active faults. Both steps are built into the Modern Collision visit before pickup. Dynamic calibration itself requires the seal to reach drive-away strength first, so a road drive is never part of the job until the cure time has passed.

On most equipped vehicles, four features read the road through the windshield camera: automatic emergency braking, forward collision warning, lane keeping assist, and lane departure warning. Depending on the make and model, it can also support traffic sign recognition and automatic high beams. Calibration after windshield replacement restores the camera’s aim for every feature that relies on it.

A forward camera that is not calibrated after windshield replacement can misread lane position and the distance to vehicles ahead, so lane-keeping assist and automatic emergency braking may react late, early, or not at all. A dashboard warning light does not always appear when the camera’s aim is off. Modern Collision completes the calibration and a post-scan before the vehicle leaves the shop.

A vehicle without a windshield-mounted camera does not need camera calibration after windshield replacement. The pre-scan at Modern Collision identifies which ADAS modules the vehicle has, so calibration is added to the estimate only when the OEM procedure requires it. Glass replacement on a non-equipped vehicle still includes the 1-hour minimum urethane cure.

Dynamic calibration can take longer in heavy rain or on roads with faded lane markings, because the camera needs clear markings to complete its learning cycle. Static calibration at Modern Collision takes place indoors under controlled lighting and is not affected by weather. The OEM procedure determines whether a vehicle can use static calibration, dynamic calibration, or both.

Comprehensive or glass coverage typically pays for windshield camera calibration as part of the replacement claim, subject to the policy’s glass terms and deductible. Modern Collision includes the calibration and its scan reports in the documentation sent to adjusters at State Farm, GEICO, USAA, and other carriers. Coverage approval rests with the carrier, not the shop.